4 thoughts on “How to prevent the diamond on the diamond ring from falling off?”
Nicholas
Diamonds are the most important part of the ring, and the most valuable weight of the entire ring. Generally, the volume of diamonds is relatively small. If it is dropped, it is difficult to find, so during the usual wearing process, everyone is most worried about whether the diamonds on the ring will fall inadvertently. Then let me tell you the tips to prevent diamond falling on the ring. Pay attention to choosing the inlay method of diamond ring. When buying a diamond ring, consumers should consider the problem of diamond stability, try to choose a more firm and secure inlaid method, such as claws, packets, and hidden inlays. The most common and most classic inlaid method on the ring. The method of claw setting can not only stabilize diamonds, but also clearly present the beauty of diamonds. In the inlaid method, the card inlay is the easiest to drop the diamond. The deformation of the finger ring when worn will cause the diamond to fall off. In addition, in addition to choosing the correct inlaid method, when selecting, you also need to pay attention to the production level and inlaid process of diamond ring. Those with low production level and rough inlay rings should not choose to buy. When wearing, try to avoid bumps and hooks in the process of daily wear. In order to ensure the safety of diamonds on the ring, everyone should try to avoid collision, pulling or hooking clothes in the diamond ring, so everyone do housework, exercise, etc. When working with a large range of action, it is best not to wear a diamond ring to avoid bumps. If an unavoidable collision occurs, you should immediately check whether the diamond ring diamond is loose afterwards. If there is a problem, you should not be worn immediately. When cleaning, you cannot put the diamond ring into the pool to clean the diamond ring for a long time. It will inevitably be stained with dust and the luster of the diamond will be dim. Therefore, the diamond ring needs to be cleaned regularly. However, it is also necessary to pay attention to when cleaning. The diamond ring cannot be directly washed under the faucet. Once the impact of the water flow is particularly large, the diamond may be flushed off directly. In addition, it is best not to clean the diamond ring in the pool. In this way, if the diamond falls off, it is not easy to be found and difficult to find. If you want to clean the diamond at home, it is best to find a suitable container for cleaning.
The inlaid method of the two -sided slot inlaid diamond has high requirements on the inlaid and inside slot. However, the vast majority of products are not inlaid with a large mouth, and the diamonds are small, or the inner slot is too shallow or blurred. In addition, the edge of the slot is not tightly embedded on the edge of the crown, so that the bracket and the diamond are between the diamonds and the diamonds. The difference in anastomosis is poor, causing the diamond to loosen and fall off. Diamonds are often embedded with inlaid methods. The diamonds used are mostly 0.02CT to 0.06CT diamonds. In order to cover the diamonds as little as possible during the production of these diamond jewelry, most of the processing processes are simply hitting a small hole on the abstinence. The diamond is placed in the hole, and then the diamond material around the diamond is used to squeeze the diamond material. The area covered by the diamond crown generally does not exceed 10%. The material back material that holds the diamond is often narrow. It is almost difficult to see the traces of metal. It seems to be beautiful, but the solid effect of inlaid If you talk about it, you will fall. The claws inlaid. After so long development, the method of inlaid is difficult to introduce new ways. Therefore, some styles have sacrificed other aspects of demand for new. Therefore, the innate deficiency in design is also an important cause of diamond falling.
When choosing a diamond style, try to choose the traditional form, because the reason why this style has been circulating for a long time is mainly because it is better in setting technology. It is important that these styles will not be outdated. There are very few signs of drilling. When cleaning the diamond jewelry, remember not to clean it in the pool, and it is easy to find even if the diamond falls off. When you wear it, you should often check whether the diamond is loosened. Yingji ZB recommends that if you have it, you must repairs and maintain it in time. Do not wear it before repair. Be sure to remove it when you take a bath, because the diamond ring is easy to fall when bathing.
It is recommended to reinforce six claws. The claws are relatively thick when customized. There is something that is rare when we wear to prevent it from being scratched.
Diamonds are the most important part of the ring, and the most valuable weight of the entire ring. Generally, the volume of diamonds is relatively small. If it is dropped, it is difficult to find, so during the usual wearing process, everyone is most worried about whether the diamonds on the ring will fall inadvertently. Then let me tell you the tips to prevent diamond falling on the ring. Pay attention to choosing the inlay method of diamond ring. When buying a diamond ring, consumers should consider the problem of diamond stability, try to choose a more firm and secure inlaid method, such as claws, packets, and hidden inlays. The most common and most classic inlaid method on the ring. The method of claw setting can not only stabilize diamonds, but also clearly present the beauty of diamonds. In the inlaid method, the card inlay is the easiest to drop the diamond. The deformation of the finger ring when worn will cause the diamond to fall off. In addition, in addition to choosing the correct inlaid method, when selecting, you also need to pay attention to the production level and inlaid process of diamond ring. Those with low production level and rough inlay rings should not choose to buy. When wearing, try to avoid bumps and hooks in the process of daily wear. In order to ensure the safety of diamonds on the ring, everyone should try to avoid collision, pulling or hooking clothes in the diamond ring, so everyone do housework, exercise, etc. When working with a large range of action, it is best not to wear a diamond ring to avoid bumps. If an unavoidable collision occurs, you should immediately check whether the diamond ring diamond is loose afterwards. If there is a problem, you should not be worn immediately. When cleaning, you cannot put the diamond ring into the pool to clean the diamond ring for a long time. It will inevitably be stained with dust and the luster of the diamond will be dim. Therefore, the diamond ring needs to be cleaned regularly. However, it is also necessary to pay attention to when cleaning. The diamond ring cannot be directly washed under the faucet. Once the impact of the water flow is particularly large, the diamond may be flushed off directly. In addition, it is best not to clean the diamond ring in the pool. In this way, if the diamond falls off, it is not easy to be found and difficult to find. If you want to clean the diamond at home, it is best to find a suitable container for cleaning.
The inlaid method of the two -sided slot inlaid diamond has high requirements on the inlaid and inside slot. However, the vast majority of products are not inlaid with a large mouth, and the diamonds are small, or the inner slot is too shallow or blurred. In addition, the edge of the slot is not tightly embedded on the edge of the crown, so that the bracket and the diamond are between the diamonds and the diamonds. The difference in anastomosis is poor, causing the diamond to loosen and fall off. Diamonds are often embedded with inlaid methods. The diamonds used are mostly 0.02CT to 0.06CT diamonds. In order to cover the diamonds as little as possible during the production of these diamond jewelry, most of the processing processes are simply hitting a small hole on the abstinence. The diamond is placed in the hole, and then the diamond material around the diamond is used to squeeze the diamond material. The area covered by the diamond crown generally does not exceed 10%. The material back material that holds the diamond is often narrow. It is almost difficult to see the traces of metal. It seems to be beautiful, but the solid effect of inlaid If you talk about it, you will fall.
The claws inlaid. After so long development, the method of inlaid is difficult to introduce new ways. Therefore, some styles have sacrificed other aspects of demand for new. Therefore, the innate deficiency in design is also an important cause of diamond falling.
When choosing a diamond style, try to choose the traditional form, because the reason why this style has been circulating for a long time is mainly because it is better in setting technology. It is important that these styles will not be outdated. There are very few signs of drilling. When cleaning the diamond jewelry, remember not to clean it in the pool, and it is easy to find even if the diamond falls off. When you wear it, you should often check whether the diamond is loosened. Yingji ZB recommends that if you have it, you must repairs and maintain it in time. Do not wear it before repair. Be sure to remove it when you take a bath, because the diamond ring is easy to fall when bathing.
It is recommended to reinforce six claws. The claws are relatively thick when customized. There is something that is rare when we wear to prevent it from being scratched.