wholesale silver jewelry with southern saying How to view your own port number?

Adrian

November 28, 2022 at 6:16 pm

how to buy jewelry supplies wholesale Start/program/attachment/command prompt/netStat -NA/Enter, check the ports you are now open now, and then introduce according to the following port:
Some are ports that system services must be open, not you say that you can pass the level. It can be closed, you may stop the process, but it will be re -established. You can compare the following port knowledge. If it is not open to the dangerous port, you can ignore it.

The computer port explanation

I often see "ports" such as 135, 137, 139, 443 in various technical articles, but these ports What is the use? Will it bring potential threats to our computers? How many ports are useful? If you want to know, just come with me

: 0
Service: Reserved
Instructions: It is usually used to analyze the operating system. This method can work because "0" in some systems is an invalid port. When you try to connect it with the usual closed port, you will produce different results. A typical scan, using the IP address to 0.0.0.0, set the ACK bit and broadcast it on the Ethernet layer.

: 1
Service: TCPMUX
Instructions: This shows that someone is looking for SGI IRIX machines. Irix is the main provider of TCPMUX, and TCPMUX is opened in this system by default. IRIX machines are publishing several default password -free accounts, such as: IP, Guest UUCP, NUUCP, DEMOS, TUTOR, DIAG, OUTOFBOX, etc. Many administrators forget to delete these accounts after installation. So Hacker searched TCPMUX on Internet and used these accounts.
: 7
Service: Echo
Instructions: When you can see many people search for Fraggle amplifiers, send information from x.x.x.0 and x.x.x.255.
: 19
Service: Character Generator
Instructions: This is a service that only sends characters. The UDP version will respond to a bag containing junk characters after receiving the UDP package. When the TCP is connected, the data flow containing junk characters will be sent until the connection is closed. Hacker uses IP deception to launch a DOS attack. Forge the UDP package between the two Chargen servers. Similarly, the Fraggle DOS attacks this port to the target address and broadcasts a data packet with forged victim IP, which is overloaded to respond to these data.
: 21
service: FTP
Instructions: The port open by the FTP server is used for uploading and downloading. The most common attacker is used to find a way to open the ANYMOUS FTP server. These servers have readable directory. Trojan Doy Trojan, Fore, Invisible FTP, Webex, WinCrash, and Blade Runner's port.
: 22
Service: SSH
Instructions: The connection between the established TCP and this port may be to find SSH. There are many weaknesses in this service. If configured into a specific mode, many versions of the RSAREF library will have many vulnerabilities.
: 23
service: telnet
Instructions: Remote login, the invaders search for remote login UNIX service. In most cases, scanning this port is to find the operating system of the machine running. There are other technologies, and the invaders will also find a password. Trojan Tiny Telnet Server opens this port.
: 25
service: SMTP
Instructions: The port open by the SMTP server is used to send emails. The invaders are looking for the SMTP server to convey their SPAM. The intruder's account is closed, and they need to connect to the high-bandwidth E-mail server to pass the simple information to different addresses. Trojans Antigen, Email Password Sender, HAEBU COCEDA, Shtrilitz Stealth, WinPC, Winspy are all open this port.
: 31
Service: MSG
Instructions: Trojan Master Paradise, Hackers Paradise open this port.
: 42
Service: wins
Instructions: wins copy
: 53
service: Domain name server (DNS)
Instructions: DNS server In the open port, the invaders may try to perform regional transmission (TCP), deceive DNS (UDP), or hide other communication. Therefore, the firewall is often filtered or recorded this port.
: 67
Service: Bootstrap Protocol Server
Instructions: Data sent to the broadcast address of 255.255.255.255 through the firewalls of DSL and Cable Modem. These machines are requesting a address from the DHCP server. Hacker often enters them, assigning an address to launch a large number of man (Man-in-Middle) attacks as a local router. The client requested the configuration of the broadcast 68, and the server responded to the 67 -port broadcast request. This response is used because the client does not know the IP address that can be sent.
: 69
Service: Trival File Transfer
Instructions: Many servers provide this service together with Bootp, which is convenient for the startup code from the system. But they often steal any files from the system due to error configuration. They can also be used to write files.
: 79
Service: Finger Server
Instructions: In the invaders are used to obtain user information, query the operating system, detect the unknown buffer overflow error, in response scanning.
: 80
Service: http
Instructions: Used for web browsing. Trojan Executor opens this port.
: 99
Service: Metagram related
Instructions: The backdoor program NCX99 opens this port.
: 102
Service: Message transfer agent (MTA) -X.400 Over TCP/IP
Instructions: Message transmission proxy.

: 109
Service: Post Office Protocol -Version3
Instructions: POP3 server is open to this port for receiving email services on the server. Pop3 services have many recognized weaknesses. There are at least 20 weaknesses over the overflow of the username and password switching buffer, which means that the intruder can enter the system before the actual landing. After successful landing, there are other buffer overflow errors.
port: 110
service: SUN's RPC service all ports
Note: Common RPC services include RPC.MOUNTD, NFS, RPC.Statd, RPC.CSMD, RPC.TTYBD, AMD, etc.
: 113
Service: Service
Instructions: This is a protocol running on the computer for users who are used to identify TCP connections. This service using standards can obtain many computer information. But it can be used as a recorder of many services, especially FTP, POP, IMAP, SMTP, and IRC. Usually, if many customers access these services through the firewall, many connection requests of this port will be seen. Remember, if you block this port client, you will feel the slow connection with the E-Mail server on the other side of the firewall. Many firewalls support the RST during the blocking process of the TCP connection. This will stop slowly.
: 119
Service: Network News Transfer Protocol
Note: News The transmission protocol of news group is carried. The connection of this port is usually looking for the Usenet server. Most ISP restrictions, only their customers can access their news group server. Opening the news group server will allow post/read anyone's posts, access the restricted news group server, and anonymous posts or send spam.

: 135
service: Location Service
Instructions: Microsoft runs DCE RPC End-Point Mapper on this port for its DCOM service. This is very similar to the function of the Unix 111 port. Use DCOM and RPC services to register their positions with End-Point Mapper on the computer. When the remote client is connected to the computer, they find End-Point Mapper to find the location of the service. Is the port of Hacker scan the computer to find the Exchange Server running on this computer? What version? There are also some DOS attacks directly targeting this port.
: 137, 138, 139
Service: Netbios name service
Instructions: 137 and 138 are UDP ports. This port is used when transmitted files through online neighbors. Port 139: Try to get Netbios/SMB services through the connection to this port. This protocol is used for Windows files and printers sharing and Samba. And Wins also use it.
: 143
Service: Interim Mail Access Protocol V2
Instructions: Like the security problem of POP3, many IMAP servers have buffer overflow vulnerabilities. Remember: a Linux worm (ADMV0RM) will reproduce through this port, so many scans on this port come from the infected users who have not been known. When Redhat is allowed to be allowed in their Linux release version, these vulnerabilities become popular. This port is also used for IMAP2, but it is not popular.
: 161
service: SNMP
Instructions: SNMP allows remote management equipment. All configuration and running information are stored in the database, and this information can be obtained through SNMP. Many administrators' error configurations will be exposed to Internet. CACKERS will try to access the system with the default password PUBLIC and Private. They may test all possible combinations. The SNMP package may be directed to the user's network by mistake.
: 177
Service: X Display Manager Control Protocol
The: Many invaders access the X-Windows operating desk through it, which requires opening 6000 ports at the same time.
: 389
Service: LDAP, ILS
Instructions: Light directory access protocols and Internet local server share this end.
: 443
Service: https
Note: Web browsing ports can provide another HTTP that can be encrypted and transmitted through the security port.
: 456
Service: [null]
Instructions: Trojan Hacker Paradise opens this port.
: 513
Service: Login, Remote Login
Instructions: It is a radio from the Unix computer from the UNIX computer using Cable Modem or DSL. These people invaders have provided information to their systems.
: 544
Service: [null]
Note: Kerberos Kshell
: 548
Service: Macintosh, File Services (AFP/IP)
Note: Macintosh, file service.
: 553
Service: Corba IIOP (UDP)
Instructions: Use Cable Modem, DSL or VLAN will see the broadcast of this port. Corba is an object -oriented RPC system. Invaders can use this information to enter the system.
: 555
Service: DSF
Instructions: Trojan Phase1.0, Stealth SPY, Inkiller open this port.
: 568
Service: DPA
Instructions: Member qualification DPA.
: 569
Service: MSN
Instructions: Member qualification MSN.
: 635
Service: mountd
Instructions: linux mountd bug. This is a popular BUG of scanning. Most of the scanning of this port is based on UDP, but the Mountd based on TCP is increased (Mountd runs at the two ports at the same time). Remember that Mountd can run on any port (which port is, you need to do PORTMAP query on the port 111), but the Linux default port is 635, just like NFS usually runs on port 2049.
: 636
service: LDAP
Instructions: SSL (Secure Sockets Layer)
: 666
Service: Doom ID Software n Note: Trojan Attack FTP, Satanz Backdoor Open this port
: 993
Service: imap
Instructions: SSL (Secure Sockets Layer)
: 1001, 1011
Service: [Nulll ]
The description: Trojan Silencer and Webex open port 1001. Trojan Doy Trojan opens 1011 ports.
: 1024
Service: Reserved
Instructions: It is the beginning of the dynamic port. Many programs do not care which port is connected to the network. They request the system to allocate the next idle port for them. Based on this point, starting from the port 1024. This is to say that the first request to send a request will be allocated to port 1024. You can restart the machine, turn on the telnet, and then open a window to run Natstat -A, and you will see that the telnet is assigned to the 1024 port. There are also SQL SESSION also use this port and 5000 ports.
port: 1025, 1033
Service: 1025: network blackjack 1033: [null]
Instructions: Trojan Horse Netspy opens these two ports.
: 1080
Service: Socks
Instructions: This protocol passes through the firewall in a channel, allowing people behind the firewall to access the Internet via an IP address. In theory, it should only allow internal communication to reach the Internet. However, due to the wrong configuration, it allows attacks outside the firewall to pass through the firewall. This error often occurs in Wingate, and this is often seen in joining the IRC chat room.
: 1170
Service: [null]
Instructions: Trojan Streaming Audio Trojan, Psyber Stream Server, Voice open this port.
: 1234, 1243, 6711, 6776
Service: [null]
Instructions: Trojan Subseven2.0, Ultors Trojan opens 1234, 6776. Trojan Subseven 1.0/1.9 Open Port 1243, 6711, 6776.
: 1245
Service: [null]
Instructions: Trojan Vodoo opens this port.
: 1433
service: SQL
Instructions: Microsoft's SQL service open port.
: 1492
Service: Stone-design-1
Instructions: Trojan FTP99CMP opens this port.
: 1500
Service: RPC Client Fixed Port Session Queries
Instructions: RPC Customer Fixed Port Session Query
: 1503
Service: T.120
Instructions: T.120
: 1524
Service: Ingress
Note: Many attack scripts will install a back door shell to this port, especially for SENDMAIL and RPC service vulnerabilities in the SUN system. script. If you just install the firewall, you can see the connection attempt on this port, which is likely to be the above. You can try this port on Telnet to the user's computer to see if it will give you a shell. This problem also exists in the connection to 600/pcServer.
: 1600
Service: ISSD
Instructions: Trojan Shivka-Burka opens this port.
: 1720
Service:
Instructions: H.233 call setup.
: 1731
Service: Audio Call Control
Instructions: Audio call control.
: 1807
Service: [null]
Instructions: Trojan Spysender opens this port.
: 1981
Service: [null]
Instructions: Trojan Shockrave opens this port.
: 1999
Service: Cisco Port
Instructions: Trojan Backdoor opens this port.

: 2000
Service: [null]
Instructions: Trojan 1.3, Millenium 1.0 open this port.
: 2001
Service: [null]
Instructions: Trojan Millenium 1.0, Trojan Cow open this port.
: 2023
Service: 4
Instructions: Trojan Pass Ripper opens this port.
: 2049
Service: NFS
Instructions: NFS program often runs on this port. Generally, you need to visit which port the service is running.
: 2115
Service: [null]
Instructions: Trojan Bugs opens this port.

: 2140, 3150
Service: [null]
Instructions: Trojan Deep Throat 1.0/3.0 Open this port.
: 2500
service: RPC Client using a fixed port session
Instructions: RPC customer with fixed port session
: 2583
service: [null]
The explanatory: Trojan WinCrash 2.0 opens this port.
: 2801
Service: [null]
Instructions: Trojan Phineas Phucker opens this port.
: 3024, 4092
Service: [null]
Instructions: Trojan WinCrash opens this port.
: 3128
Service: Squid
Instructions: This is the default port of the Squid HTTP proxy server. The attacker scan this port anonymous to access to the Internet to search for a proxy server. You will also see the port of other proxy servers 8000, 8001, 8080, 8888. Another reason for scanning this port is that users are entering the chat room. Other users will also check this port to determine whether the user's machine supports the agent.
: 3129
Service: [null]
Instructions: Trojan Master Paradise opens this port.
: 3150
Service: [null]
Instructions: Trojan The Invasor opens this port.
: 3210, 4321
Service: [null]
Note: Trojan Schoolbus opens this port

port: 3333
Service: dec-notes
: Trojan Prosiak opens this port
: 3389
Service: Super Terminal
Instructions: Windows 2000 terminal opens this port.
: 3700
Service: [null]
Note: Trojan Portal of Doom opens this port
: 3996, 4060
Service: [null]
Instructions: Trojan opens this port
: 4000
Service: QQ client
Note: Tencent QQ client opens this port.
: 4092
Service: [null]
Instructions: Trojan Wincrash opens this port.
: 4590
Service: [null]
Instructions: Trojan ICQTROJAN opens this port.
Port: 5000, 5001, 5321, 50505 service: [null]
shows: Trojan Blazer5 opens 5000 ports. Trojan Sockets de Troie is open 5000, 5001, 5321, 50505 ports.
: 5400, 5401, 5402
Service: [null]
Instructions: Trojan Blade Runner opens this port.
: 5550
Service: [null]
Instructions: Trojan XTCP opens this port.
: 5569
Service: [null]
Instructions: Trojan Robo-Hack opens this port.
: 5632
Service: PCANYWERE
Instructions: Sometimes you see a lot of scanning of this port, which depends on the position where the user is located. When the user opens PCANYWERE, it will automatically scan the local area network C to find possible agents (the agent here refers to agent rather than proxy). Invaders will also look for computers that open this service. So you should check the source address of this scan. Some scan packets that search for PCANYWERE often contain UDP packets with port 22.

3 thoughts on “wholesale silver jewelry with southern saying How to view your own port number?”

Adrian
November 28, 2022 at 6:16 pm

how to buy jewelry supplies wholesale Start/program/attachment/command prompt/netStat -NA/Enter, check the ports you are now open now, and then introduce according to the following port:
Some are ports that system services must be open, not you say that you can pass the level. It can be closed, you may stop the process, but it will be re -established. You can compare the following port knowledge. If it is not open to the dangerous port, you can ignore it.

The computer port explanation

I often see "ports" such as 135, 137, 139, 443 in various technical articles, but these ports What is the use? Will it bring potential threats to our computers? How many ports are useful? If you want to know, just come with me

: 0
Service: Reserved
Instructions: It is usually used to analyze the operating system. This method can work because "0" in some systems is an invalid port. When you try to connect it with the usual closed port, you will produce different results. A typical scan, using the IP address to 0.0.0.0, set the ACK bit and broadcast it on the Ethernet layer.

: 1
Service: TCPMUX
Instructions: This shows that someone is looking for SGI IRIX machines. Irix is the main provider of TCPMUX, and TCPMUX is opened in this system by default. IRIX machines are publishing several default password -free accounts, such as: IP, Guest UUCP, NUUCP, DEMOS, TUTOR, DIAG, OUTOFBOX, etc. Many administrators forget to delete these accounts after installation. So Hacker searched TCPMUX on Internet and used these accounts.
: 7
Service: Echo
Instructions: When you can see many people search for Fraggle amplifiers, send information from x.x.x.0 and x.x.x.255.
: 19
Service: Character Generator
Instructions: This is a service that only sends characters. The UDP version will respond to a bag containing junk characters after receiving the UDP package. When the TCP is connected, the data flow containing junk characters will be sent until the connection is closed. Hacker uses IP deception to launch a DOS attack. Forge the UDP package between the two Chargen servers. Similarly, the Fraggle DOS attacks this port to the target address and broadcasts a data packet with forged victim IP, which is overloaded to respond to these data.
: 21
service: FTP
Instructions: The port open by the FTP server is used for uploading and downloading. The most common attacker is used to find a way to open the ANYMOUS FTP server. These servers have readable directory. Trojan Doy Trojan, Fore, Invisible FTP, Webex, WinCrash, and Blade Runner's port.
: 22
Service: SSH
Instructions: The connection between the established TCP and this port may be to find SSH. There are many weaknesses in this service. If configured into a specific mode, many versions of the RSAREF library will have many vulnerabilities.
: 23
service: telnet
Instructions: Remote login, the invaders search for remote login UNIX service. In most cases, scanning this port is to find the operating system of the machine running. There are other technologies, and the invaders will also find a password. Trojan Tiny Telnet Server opens this port.
: 25
service: SMTP
Instructions: The port open by the SMTP server is used to send emails. The invaders are looking for the SMTP server to convey their SPAM. The intruder's account is closed, and they need to connect to the high-bandwidth E-mail server to pass the simple information to different addresses. Trojans Antigen, Email Password Sender, HAEBU COCEDA, Shtrilitz Stealth, WinPC, Winspy are all open this port.
: 31
Service: MSG
Instructions: Trojan Master Paradise, Hackers Paradise open this port.
: 42
Service: wins
Instructions: wins copy
: 53
service: Domain name server (DNS)
Instructions: DNS server In the open port, the invaders may try to perform regional transmission (TCP), deceive DNS (UDP), or hide other communication. Therefore, the firewall is often filtered or recorded this port.
: 67
Service: Bootstrap Protocol Server
Instructions: Data sent to the broadcast address of 255.255.255.255 through the firewalls of DSL and Cable Modem. These machines are requesting a address from the DHCP server. Hacker often enters them, assigning an address to launch a large number of man (Man-in-Middle) attacks as a local router. The client requested the configuration of the broadcast 68, and the server responded to the 67 -port broadcast request. This response is used because the client does not know the IP address that can be sent.
: 69
Service: Trival File Transfer
Instructions: Many servers provide this service together with Bootp, which is convenient for the startup code from the system. But they often steal any files from the system due to error configuration. They can also be used to write files.
: 79
Service: Finger Server
Instructions: In the invaders are used to obtain user information, query the operating system, detect the unknown buffer overflow error, in response scanning.
: 80
Service: http
Instructions: Used for web browsing. Trojan Executor opens this port.
: 99
Service: Metagram related
Instructions: The backdoor program NCX99 opens this port.
: 102
Service: Message transfer agent (MTA) -X.400 Over TCP/IP
Instructions: Message transmission proxy.

: 109
Service: Post Office Protocol -Version3
Instructions: POP3 server is open to this port for receiving email services on the server. Pop3 services have many recognized weaknesses. There are at least 20 weaknesses over the overflow of the username and password switching buffer, which means that the intruder can enter the system before the actual landing. After successful landing, there are other buffer overflow errors.
port: 110
service: SUN's RPC service all ports
Note: Common RPC services include RPC.MOUNTD, NFS, RPC.Statd, RPC.CSMD, RPC.TTYBD, AMD, etc.
: 113
Service: Service
Instructions: This is a protocol running on the computer for users who are used to identify TCP connections. This service using standards can obtain many computer information. But it can be used as a recorder of many services, especially FTP, POP, IMAP, SMTP, and IRC. Usually, if many customers access these services through the firewall, many connection requests of this port will be seen. Remember, if you block this port client, you will feel the slow connection with the E-Mail server on the other side of the firewall. Many firewalls support the RST during the blocking process of the TCP connection. This will stop slowly.
: 119
Service: Network News Transfer Protocol
Note: News The transmission protocol of news group is carried. The connection of this port is usually looking for the Usenet server. Most ISP restrictions, only their customers can access their news group server. Opening the news group server will allow post/read anyone's posts, access the restricted news group server, and anonymous posts or send spam.

: 135
service: Location Service
Instructions: Microsoft runs DCE RPC End-Point Mapper on this port for its DCOM service. This is very similar to the function of the Unix 111 port. Use DCOM and RPC services to register their positions with End-Point Mapper on the computer. When the remote client is connected to the computer, they find End-Point Mapper to find the location of the service. Is the port of Hacker scan the computer to find the Exchange Server running on this computer? What version? There are also some DOS attacks directly targeting this port.
: 137, 138, 139
Service: Netbios name service
Instructions: 137 and 138 are UDP ports. This port is used when transmitted files through online neighbors. Port 139: Try to get Netbios/SMB services through the connection to this port. This protocol is used for Windows files and printers sharing and Samba. And Wins also use it.
: 143
Service: Interim Mail Access Protocol V2
Instructions: Like the security problem of POP3, many IMAP servers have buffer overflow vulnerabilities. Remember: a Linux worm (ADMV0RM) will reproduce through this port, so many scans on this port come from the infected users who have not been known. When Redhat is allowed to be allowed in their Linux release version, these vulnerabilities become popular. This port is also used for IMAP2, but it is not popular.
: 161
service: SNMP
Instructions: SNMP allows remote management equipment. All configuration and running information are stored in the database, and this information can be obtained through SNMP. Many administrators' error configurations will be exposed to Internet. CACKERS will try to access the system with the default password PUBLIC and Private. They may test all possible combinations. The SNMP package may be directed to the user's network by mistake.
: 177
Service: X Display Manager Control Protocol
The: Many invaders access the X-Windows operating desk through it, which requires opening 6000 ports at the same time.
: 389
Service: LDAP, ILS
Instructions: Light directory access protocols and Internet local server share this end.
: 443
Service: https
Note: Web browsing ports can provide another HTTP that can be encrypted and transmitted through the security port.
: 456
Service: [null]
Instructions: Trojan Hacker Paradise opens this port.
: 513
Service: Login, Remote Login
Instructions: It is a radio from the Unix computer from the UNIX computer using Cable Modem or DSL. These people invaders have provided information to their systems.
: 544
Service: [null]
Note: Kerberos Kshell
: 548
Service: Macintosh, File Services (AFP/IP)
Note: Macintosh, file service.
: 553
Service: Corba IIOP (UDP)
Instructions: Use Cable Modem, DSL or VLAN will see the broadcast of this port. Corba is an object -oriented RPC system. Invaders can use this information to enter the system.
: 555
Service: DSF
Instructions: Trojan Phase1.0, Stealth SPY, Inkiller open this port.
: 568
Service: DPA
Instructions: Member qualification DPA.
: 569
Service: MSN
Instructions: Member qualification MSN.
: 635
Service: mountd
Instructions: linux mountd bug. This is a popular BUG of scanning. Most of the scanning of this port is based on UDP, but the Mountd based on TCP is increased (Mountd runs at the two ports at the same time). Remember that Mountd can run on any port (which port is, you need to do PORTMAP query on the port 111), but the Linux default port is 635, just like NFS usually runs on port 2049.
: 636
service: LDAP
Instructions: SSL (Secure Sockets Layer)
: 666
Service: Doom ID Software n Note: Trojan Attack FTP, Satanz Backdoor Open this port
: 993
Service: imap
Instructions: SSL (Secure Sockets Layer)
: 1001, 1011
Service: [Nulll ]
The description: Trojan Silencer and Webex open port 1001. Trojan Doy Trojan opens 1011 ports.
: 1024
Service: Reserved
Instructions: It is the beginning of the dynamic port. Many programs do not care which port is connected to the network. They request the system to allocate the next idle port for them. Based on this point, starting from the port 1024. This is to say that the first request to send a request will be allocated to port 1024. You can restart the machine, turn on the telnet, and then open a window to run Natstat -A, and you will see that the telnet is assigned to the 1024 port. There are also SQL SESSION also use this port and 5000 ports.
port: 1025, 1033
Service: 1025: network blackjack 1033: [null]
Instructions: Trojan Horse Netspy opens these two ports.
: 1080
Service: Socks
Instructions: This protocol passes through the firewall in a channel, allowing people behind the firewall to access the Internet via an IP address. In theory, it should only allow internal communication to reach the Internet. However, due to the wrong configuration, it allows attacks outside the firewall to pass through the firewall. This error often occurs in Wingate, and this is often seen in joining the IRC chat room.
: 1170
Service: [null]
Instructions: Trojan Streaming Audio Trojan, Psyber Stream Server, Voice open this port.
: 1234, 1243, 6711, 6776
Service: [null]
Instructions: Trojan Subseven2.0, Ultors Trojan opens 1234, 6776. Trojan Subseven 1.0/1.9 Open Port 1243, 6711, 6776.
: 1245
Service: [null]
Instructions: Trojan Vodoo opens this port.
: 1433
service: SQL
Instructions: Microsoft's SQL service open port.
: 1492
Service: Stone-design-1
Instructions: Trojan FTP99CMP opens this port.
: 1500
Service: RPC Client Fixed Port Session Queries
Instructions: RPC Customer Fixed Port Session Query
: 1503
Service: T.120
Instructions: T.120
: 1524
Service: Ingress
Note: Many attack scripts will install a back door shell to this port, especially for SENDMAIL and RPC service vulnerabilities in the SUN system. script. If you just install the firewall, you can see the connection attempt on this port, which is likely to be the above. You can try this port on Telnet to the user's computer to see if it will give you a shell. This problem also exists in the connection to 600/pcServer.
: 1600
Service: ISSD
Instructions: Trojan Shivka-Burka opens this port.
: 1720
Service:
Instructions: H.233 call setup.
: 1731
Service: Audio Call Control
Instructions: Audio call control.
: 1807
Service: [null]
Instructions: Trojan Spysender opens this port.
: 1981
Service: [null]
Instructions: Trojan Shockrave opens this port.
: 1999
Service: Cisco Port
Instructions: Trojan Backdoor opens this port.

: 2000
Service: [null]
Instructions: Trojan 1.3, Millenium 1.0 open this port.
: 2001
Service: [null]
Instructions: Trojan Millenium 1.0, Trojan Cow open this port.
: 2023
Service: 4
Instructions: Trojan Pass Ripper opens this port.
: 2049
Service: NFS
Instructions: NFS program often runs on this port. Generally, you need to visit which port the service is running.
: 2115
Service: [null]
Instructions: Trojan Bugs opens this port.

: 2140, 3150
Service: [null]
Instructions: Trojan Deep Throat 1.0/3.0 Open this port.
: 2500
service: RPC Client using a fixed port session
Instructions: RPC customer with fixed port session
: 2583
service: [null]
The explanatory: Trojan WinCrash 2.0 opens this port.
: 2801
Service: [null]
Instructions: Trojan Phineas Phucker opens this port.
: 3024, 4092
Service: [null]
Instructions: Trojan WinCrash opens this port.
: 3128
Service: Squid
Instructions: This is the default port of the Squid HTTP proxy server. The attacker scan this port anonymous to access to the Internet to search for a proxy server. You will also see the port of other proxy servers 8000, 8001, 8080, 8888. Another reason for scanning this port is that users are entering the chat room. Other users will also check this port to determine whether the user's machine supports the agent.
: 3129
Service: [null]
Instructions: Trojan Master Paradise opens this port.
: 3150
Service: [null]
Instructions: Trojan The Invasor opens this port.
: 3210, 4321
Service: [null]
Note: Trojan Schoolbus opens this port

port: 3333
Service: dec-notes
: Trojan Prosiak opens this port
: 3389
Service: Super Terminal
Instructions: Windows 2000 terminal opens this port.
: 3700
Service: [null]
Note: Trojan Portal of Doom opens this port
: 3996, 4060
Service: [null]
Instructions: Trojan opens this port
: 4000
Service: QQ client
Note: Tencent QQ client opens this port.
: 4092
Service: [null]
Instructions: Trojan Wincrash opens this port.
: 4590
Service: [null]
Instructions: Trojan ICQTROJAN opens this port.
Port: 5000, 5001, 5321, 50505 service: [null]
shows: Trojan Blazer5 opens 5000 ports. Trojan Sockets de Troie is open 5000, 5001, 5321, 50505 ports.
: 5400, 5401, 5402
Service: [null]
Instructions: Trojan Blade Runner opens this port.
: 5550
Service: [null]
Instructions: Trojan XTCP opens this port.
: 5569
Service: [null]
Instructions: Trojan Robo-Hack opens this port.
: 5632
Service: PCANYWERE
Instructions: Sometimes you see a lot of scanning of this port, which depends on the position where the user is located. When the user opens PCANYWERE, it will automatically scan the local area network C to find possible agents (the agent here refers to agent rather than proxy). Invaders will also look for computers that open this service. So you should check the source address of this scan. Some scan packets that search for PCANYWERE often contain UDP packets with port 22.

Log in to Reply
Carole
November 28, 2022 at 6:16 pm

costume jewelry wholesale halloween When setting the proxy server, you need to fill in the port. This port number is freely filled in the server. Generally, it is greater than 1024 and less than 65535. When the client uses this proxy server to access the Internet, the port number must be the same as the port number set on the proxy server.

ToMCat uses port 8080 by default to change it by itself.

The portal number of the server side software can generally be customized. As long as it is between 1024 -65535, it is not repeated. Each software is different. Generally in the "setting" interface.
If the client software, if you want to set the port number, you must be the same as the server.

Log in to Reply
Christopher
November 28, 2022 at 6:16 pm

wrestling jewelry wholesale The port number refers to the port used to distinguish the service in the logical sense, which is different from the hardware level. For example, the service port in the TCP/IP protocol, the range of the port number from 0 to 65535, such as port 80 ports for browsing web services, 21 ports for FTP services, etc. Each service on the computer has a unique port number to distinguish between other services. When the port number is already in use, the new service will have conflicts on the port when using this port, so we need to check it first when setting the port number.

In step -by -step reading mode
Tool materials:
1. View the port number
01
Open the running menu and enter the CMD in the input bar to open the command line window.

02
can also enter CMD in the start menu for search, find the black CMD shortcut icon and click to open the command line window.

03
In the command in the command line
"netstat", press Enter to execute the command to check all the port number information. These port number is not distinguished or classified, and all are in use, or the ending number that has been dormant and waiting to be established will be displayed ...

04
-ANO "runs, and the PID will be displayed at the end of each port information. PID is the number of programs in the computer, and you can quickly find applications that take up this port through this number.

05
The portal number is not classified after all port number display, which looks messy, and it is inconvenient to find. You can quickly locate and display the use of the specified port number by executing commands
netstat -aon | Findstr "Portal". Note that the port number must be included with dual quotes "".

06
executed commands
tasklist | Findstr "process serial number pid" to view the name of the process of occupying ports and the memory size occupied. PID needs to be included with dual quotes.

2. Ending the corresponding process
01
The process of termination of the corresponding process to avoid conflicts with new applications. You can enter the command "
taskkill /f /t /IM program name .exe ", forced the corresponding application to end.

02
The information that takes up the port number of the port can also be viewed in the task manager. Press Ctrl Shift Delete, or select "Task Manager" after right -clicking in the Windows taskbar.
03
The "Detailed Information" tag after opening the task manager, sort according to the PID under the details, and then find the corresponding application of the corresponding application slogan.

04
After finding the corresponding application, the left -click after clicking, right -click to perform the corresponding operation in the menu that appears. If you look at the folder, select "Open the position where the file is located" and so on.

Log in to Reply

3 thoughts on “wholesale silver jewelry with southern saying How to view your own port number?”

Leave a Comment Cancel Reply